Editing ZB-26

{{PlayableUnit
|index = 
|nationality = 	Czechoslovakia
|classification = MG
|rarity = 5
|faction = [[Griffin & Kryuger]]
|manufactureringame = [[I.O.P.]]
|manufacturer = Zbrojovka Brno, Military Technical Institute Kragujevac
|artist = {{artist name|whoisshe}}
|fullname = ZB vz. 26
|voiceactor = 
|releasedon = <!--{{doll_server_alias|server=CN|alias=ZB-26}}, {{doll_server_alias|server=TW|alias=ZB-26}}, {{doll_server_alias|server=KR|alias=ZB-26}}, {{doll_server_alias|server=EN|alias=ZB-26}}, {{doll_server_alias|server=JP|alias=ZB-26}} -->

| weaponinfo =
The ZB vz. 26 was a Czechoslovak light machine gun developed in the 1920s, which went on to enter service with several countries. It saw its major use during World War II, and spawned the related ZB vz. 27, vz. 30, and vz. 33. The ZB vz. 26 influenced many other light machine gun designs including the British Bren light machine gun and the Japanese Type 96 Light Machine Gun. The ZB-26 is famous for its reliability, simple components, quick-change barrel and ease of manufacturing. This light machine gun in the Czechoslovak army was marked as the LK vz. 26 ("LK" means lehký kulomet, light machine gun; "vz." stands for vzor, Model in Czech). ZB vz. 26 is incorrect marking because "ZB-26" is a factory designation (Československá zbrojovka v Brně), while "vzor 26" or "vz. 26" is an army designation.

In around 1921 the military of the young Czechoslovakian state embarked on a quest for a light machine gun of their own. Early trials included foreign designs and several domestic designs. Of these, the most important was the Praha II, a lightweight, belt-fed weapon built at Česka Zbrojovka (CZ) Praha (Czech Arms factory in Prague).

Development of the ZB-26 began in 1923 after the Czechoslovak Brno arms factory was built. Since CZ-Praha was a relatively small factory with limited industrial capabilities, it was decided to transfer the production of the new automatic weapon to the more advanced Zbrojovka Brno, or ZB in short. This transfer resulted in a long series of court trials over royalties, between the owners of the design (CZ-Praha) and the manufacturer (ZB). Designer Václav Holek was charged by the Czechoslovak army with producing a new light machine gun. He was assisted by his brother Emmanuel, as well as two Austrian and Polish engineers, respectively named Marek and Podrabsky. Holek quickly began work on the prototype of the Praha II and within a year the quartet had created an automatic light machine gun that was later known as the ZB.

Before long, the Holek brothers abandoned the belt feed in favor of a top-feeding box magazine and the resulting weapon, known as the Praha I-23, was selected. Despite the past legal troubles, manufacture of the new weapon had commenced at the ZB factory by late 1926, and it became the standard light machine gun of the Czechoslovak Army by 1928.
The ZB-26 is a gas-operated, air-cooled, selective-fire machine gun. It has a finned, quick-detachable barrel and fires from an open bolt. Its action is powered by a long-stroke gas piston, located below the barrel. The gas block is mounted at the muzzle end of the barrel and also serves as the front sight base. The action is locked by tipping the rear of the bolt (breechblock) upwards, and into a locking recess in the receiver. The return spring is located in the butt of the weapon, and is connected to the bolt carrier/gas piston via a long rod; additionally, there is a short spring buffer located around the return spring at the juncture of the receiver and butt, which softens the impact of the bolt group at the end of its rearward stroke.

Its charging handle is located at the right side of receiver and does not reciprocate when the gun is fired. The ammunition feed is from a top-mounted box magazine made from sheet steel, holding just 20 rounds in a two-row configuration. The magazine housing has a forward-sliding dust cover. Spent cartridges are ejected downwards. The ejection port is normally closed with its own dust cover which opens automatically once the trigger is pressed. The trigger unit permits both single shots and automatic fire, selectable through a safety/fire mode selector lever situated at the left side of the pistol grip. The gun fires from an open bolt and the spring-loaded firing pin is operated by a projection on the bolt carrier, once the bolt is fully in battery and locked. Because of the overhead magazine, the sight line is offset to the left, and the front sight is mounted on a base which protrudes upward and to the left from the gas block.

The rear sight is attached to the left side of receiver, and has a range adjustment mechanism controlled by a knurled rotating knob. Standard furniture consists of an integral folding bipod, which is attached to the gas cylinder tube, and a wooden butt with a spring-buffered buttplate and a folding shoulder rest plate. Although the ZB-26 was intended for the light machine gun role, it was also offered with a sustained-fire tripod, and provided with a sufficient supply of full magazines and spare barrels it could serve (to some extent) as a medium machine gun. The same tripod was also adaptable for the anti-aircraft role.

|personality = Kind-hearted and generous, she's well-versed in etiquette but demands the utmost from herself in anything she does and refuses to give up halfway... this has given her OCD, and today she is fussing over how her desk is crooked.

|min_dmg= ?
|max_dmg= ?
|min_eva= ?
|max_eva= ?
|min_acc= ?
|max_acc= ?
|min_rof= ?
|max_rof= ?
|min_hp= 10
|max_hp= 100
|mov= 4
|clipsize= ?

| craft= 6:26:00

|aura1= Affects shotguns
|aura2= Increases ?? by ??%
|aura3= Increases ?? by ??%
|tile4= 
|tile5= 
|tile6= 
|tile9= 

|gallery=<gallery>
File:ZB-26_S.png|Profile image
File:ZB-26.png|Full artwork
File:ZB-26 D.png|Full damaged artwork
</gallery>

|galleryAlt=<gallery>
File:CHARACTER_SETTINGS_ZB-26.jpg|Official character sheet for ZB-26
</gallery>

| trivia =
}}