M1919A4

M1919A4

Story

Quotes

M1919A480
Gun Information
Full name	Machine Gun, Caliber .30, Browning, M1919
Country of origin	United States
Manufacturer	Saginaw Steering Gear division of General Motors, Buffalo Arms, Rock Island Arsenal
Game Information
Faction	Griffin & Kryuger
Manufactured / Revised by	I.O.P.
Voice actor	Yoshida Sachiyo
Artist	AS109
Released on	CN, TW, KR, EN, JP
Chibi Animation
Variant: Default Carmilla Partying Sweetheart Neural Upgrade Click the marked area to switch between animations. For details regarding animations, please see Animations on the Wiki.

How to obtain

NORMALHEAVY Timer 5:40:00. See T-Doll Production for details.

DROP Can be obtained from many battle stages from Chapter 3-3E onward.

REWARD Not obtained as a reward

Exclusive Equipment

M2 Tripod Mk2

Special Steel Buttstock

Union Skill

There is no union skill for this T-Doll.

Stats / Data

Stats

Health	Ammo	Ration
87(x1) → 182(x1) / 910(x5)	40(x1) / 140(x5)	30(x1) / 90(x5)

Damage	36 → 96	Evasion	3 → 22
Accuracy	4 → 26	Rate of Fire	69 → 99
Move Speed	4	Armor	0
Crit. Rate	5%	Crit. Damage	50%
Armor Pen.	15	Clip Size	9

Equipment

Ranking of this Doll's specs relative to other Dolls of the same type.

Ranking of this Doll's specs relative to every other Doll.

Tiles

Affects shotguns

Increases accuracy by 25%

Increases armour by 10%

Skill1

name	Hunting Impulse
icon	comboBuffSelf
text	Increases accuracy by ($accuracy_value)% and causes all hits to be guaranteed critical hits for ($crit_time) seconds.
initial	3
cooldown	18	18	18	18	18	18	18	18	18	18
accuracy_value	25	29	34	38	43	47	52	56	61	65
crit_time	1	1.6	2.1	2.7	3.2	3.8	4.3	4.9	5.4	6

	name of skill here

 

Weapon Background

The M1919 Browning is an American .30 caliber medium machine gun that was widely used during the 20th century, especially during World War II, the Korean War, and the Vietnam War. The M1919 saw service in a wide variety of roles, as a light infantry, coaxial, mounted, aircraft, and anti-aircraft machine gun at various points. The emergence of general-purpose machine guns in the 1950's pushed the M1919 into secondary roles in many cases, especially after the arrival of the M60 in US Army service. The United States Navy also converted many to 7.62mm NATO, and designated them the Mk 21 Mod 0. Many NATO countries also converted their examples to 7.62 mm caliber, and these remained in service well into the 1990s, as well as up to the present day in some countries.

The M1919 was an air-cooled development of the standard US machine gun of World War I, the M1917. The M1917 was also designed by John Moses Browning, and was a water-cooled crew-served heavy machine gun. The M1917 definitely earned its 'heavy machine gun' designation: the weapon came in at a staggering 103 pounds (this is including the water and tripod). While the M1917 was a fantastic machine gun, as Browning had demonstrated during its trials when he fired the M1917 for a continuous 48 minutes and 12 seconds (over 21,000 rounds) with no parts failures. However, the weapon's weight made it unwieldy and difficult to maneuver into position. A lighter, medium-sized machine gun was needed.

After the conclusion of the First World War in 1918, the M1917 would be modified into the M1919. The M1919 uses the same short recoil mechanism as the M1917, but replaces the water-cooled barrel with an air-cooled barrel covered in a shroud. This dramatically cut down on the weapon's weight, with the M1919 coming in at 31 pounds. The change to air-cooling instead of water-cooling came with some complications, however. When it was decided to try to lighten the gun and make it air-cooled, the M1917's design as a closed-bolt weapon created a potentially dangerous situation. If the gun was very hot from prolonged firing, the cartridge ready to be fired could be resting in a red-hot barrel, causing the propellant in the cartridge to heat up to the point that it would ignite and fire the cartridge on its own (this kind of unintended weapon discharge is known as a 'cook-off'). With each further shot heating the barrel up even more, the gun would continue to fire uncontrollably until the ammunition ran out, since depressing the trigger was not what was causing the gun to fire. M1919 gunners were taught to cock the gun with the palm facing up, so that in the event of a cook-off, their thumb would not be dislocated by the charging handle. They were also taught to seize the ammunition belt and pull to prevent it from feeding if the gun ever started an uncontrollable cycle of cooking off. Gunners were trained to manage the barrel heat by firing in controlled bursts of three to five rounds, in order to delay heating. Most other air-cooled machine gun designs were fired in this way, even those featuring quick-change barrels and which fired from an open bolt, two features that make air-cooled machine guns capable of somewhat more sustained fire (both features that the M1919 design lacked).

The M1919 originally fired the .30 caliber M1906 (.30-06) ball cartridge, and later the .30 caliber M2 ball cartridge, contained in a woven cloth belt and feeding from left to right. A metal ammo link was later adopted, forming a "disintegrating" belt. Operation of the M1919 was much the same as it had been for the M1917. Loading was accomplished by inserting the pull tab on the ammunition belt from the left side of the gun until the feeding pawl at the entrance of the feed way engaged the first round in the belt and held it in place. The cocking handle was then pulled back with the right hand, palm facing up, and then released. This advanced the first round of the belt in front of the bolt for the extractor/ejector on the bolt to grab the first cartridge. The cocking handle was then pulled and released a second time. This caused the extractor to remove the first cartridge from the belt and chamber it (load it into the barrel ready to fire). As the bolt slid forward into battery, the extractor engaged the next round on the now-advanced belt resting in the feedway, preparing to draw it from the belt in the next firing cycle. Every time the gun fired a shot, the gun performed the sequence of extracting the spent round from the chamber and extracting the following round from the belt as the bolt came rearward, the fresh round ejecting the spent one when the bolt was to the rear and the fresh round cycled in front of the bolt, then on the forward stroke chambering the next round to be fired, advancing the belt, and engaging the next round in preparation for loading. Once the bolt closed, the firing pin dropped and the round was fired, and the sequence was repeated (at a rate of roughly ten cycles per second) until the trigger was released or the ammunition belt was exhausted. Except for the M1919A6, all M1919 variants had to be mounted on a tripod or other type of mount to be used effectively. The tripod used by infantry allowed traverse and elevation. To aim the gun along its vertical axis, the adjustment screw needed to be operated. This allowed the point of aim to be moved upwards or downwards, with free traverse to either side, allowing the gunner to set an elevation and sweep a wide band of fire across it by simply moving the gun from side to side. There was no need to control barrel climb or keep careful track of the fall of shots to make sure the fire was falling at the proper range. The gun was aimed using a small folding post at the front end of the receiver and a rear aperture sight on a sliding leaf with range graduations from 200 to 1,800 meters in 200 meter increments. When folded down, the aperture formed a notch that could be used to fire the gun immediately without flipping up the leaf. The rear sight also had windage adjustment with a dial on the right side.

As a company support weapon, the M1919 required a five-man crew to operate: the squad leader, the gunner (who fired the gun and when advancing carried the tripod and box of ammunition), the assistant gunner (who helped feed the gun and carried it, and a box of spare parts and tools), and two ammunition carriers. The original idea of the M1919 was to allow it to be more easily packed for transport, and featured a light barrel and bipod when first introduced as the M1919A1. Unfortunately, it quickly became clear that the gun was still too heavy to be easily moved, while at the same time being too light for sustained fire. This led to the M1919A2, which included a heavier barrel and tripod, and could sustain fire for longer periods. The M1919A4 played a key role in the firepower of the U.S. Army in World War 2. Each infantry company normally had a weapons platoon in addition to its other organic units. The presence of the M1919A4 in the weapons platoon gave company commanders additional automatic fire support at the company level, whether in the assault or on defense.

A number of updated models of the M1919 were created, each one iterating on the design as operational requirements changed. The most common variant of the M1919 series was the M1919A4. Production blueprints of this variant were complete in late 1936, and production soon followed. The driving force behind the development of this variant was the suffering reliability of the 18-inch barrel of previous versions, which did not produce enough recoil to cycle the action reliably. The bull barrel was made much thicker and was lengthened to 24 inches, like the older M1917. Various other small adjustments to the design were made, such as moving the front sight from the barrel jacket to the receiver, which made it easier to mount the gun on vehicles. The design of the barrel jacket was changed to include circular holes instead of the long slits of earlier models, and a recoil booster in the muzzle end improved reliability. The recoil buffer assembly was also a new addition to the design, added between development of the A3 and A4 variants, and was designed to reduce the impact of the bolt hitting the backplate. The M1919A4 was used in both fixed and flexible mounts, by infantry and on vehicles. It was also widely exported after World War II and continues to be used in small numbers around the world. Two variants were developed specifically for vehicular use.

Gallery

Main artwork

Gallery consisting of artworks used primarily in-game. For information on how to obtain certain costumes, see Skin Catalogue.

• 

  Profile image

• 

  Full artwork

• 

  Full damaged artwork

• 

  Neural Upgrade profile image

• 

  Neural Upgrade full artwork

• 

  Neural Upgrade full damaged artwork

• 

  "Carmilla" full artwork

• 

  "Carmilla" damaged artwork

• 

  "Partying Sweetheart" full artwork

• 

  "Partying Sweetheart" damaged artwork

Alternative artwork

Alternate gallery consisting of artworks with slight alterations as well as miscellaneous artworks.

• 

  Full damaged artwork (Censored)

• 

  "Carmilla" full artwork (Censored)

• 

  "Carmilla" damaged artwork (Censored)

• M1919A4 costume2 (Censored).png

  "Partying Sweetheart" full artwork (Censored)

Trivia

• The XM174 Grenade Launcher was based on the M1919A4. It features a 12-round drum mag, and was used in the early 1970's during the Vietnam War until was replaced by the more reliable Mk19 Grenade Launcher.
• She appears to be a quite short T-Doll in height, as the M1919A4 is about 38" or 0.96 meters in length, and it reaches her shoulders in her default damaged portrait. Also, one of her adjutant lines is an indignant "I'm not a shorty!"
• M1919A4's special equipment is a special-purpose metal buttstock assembly. This metal buttstock was designed for the later M1919A6 variant. This variant was designed during the Second World War, when US Army officials decided that the M1918 Browning Automatic Rifle, while portable, was not sufficient as a sustained fire weapon due to its fixed barrel and limited 20-round magazine. Realizing that producing an entirely new replacement machine gun would take time, the military decided that a stop-gap solution would be best and adapted an existing design. The M1919A6 was the result, and was designed to mirror the German MG 34 and MG 42 machine guns, each of which were portable for a squad weapon and were very effective at sustained fire.