13
edits
Changes
Jump to navigation
Jump to search
|skillname =
|skillid =
|costume1 =
|costume4 =
| references =|}}
Added relevant information from an existing source.
{{T-Doll|title = USP CompactPlayableUnit|index =141|nationality = Germany|classification =HG
|rarity = 2
|faction = [[Griffin & Kryuger]]|manufactureringame = [[I.O.P.]]|manufacturer =Heckler & Koch GmbH (HK), EAS|artist = {{artist name|哈路卡}}|fullname = Heckler & Koch USP Compact (Universelle Selbstladepistole)|voiceactor ={{voice actor name|Satou Arise}}|releasedon = {{doll_server_alias|server=CN|alias=USP Compact}}, {{doll_server_alias|server=TW|alias=USP Compact}}, {{doll_server_alias|server=KR|alias=USP Compact}}, {{doll_server_alias|server=EN|alias=Gr USPCompact}}, {{doll_server_alias|server=JP|alias=Gr USPコンパクト}}
| backgroundinfo weaponinfo = Design work on a new family of pistols commenced in September 1989, focused primarily on the United States commercial and law enforcement markets. USP prototypes participated in rigorous testing alongside H&K's entry in the Offensive Handgun Weapon System (OHWS) program requested by the U.S. Special Operations Command (USSOCOM), which would later result in the Mk 23 Mod 0. The USP prototypes were then refined in 1992, based on input from the OHWS trials, and the design was finalized in December of the same year. The USP was formally introduced in January 1993 with the USP40 model (the base version) chambered for the increasingly popular .40 S&W cartridge, followed soon by the USP9 (using the 9×19mm Parabellum cartridge), and in May 1995—the USP45 (caliber .45 ACP). In contrast to the ambitious and innovative P7, P9S, and VP70Z designs, the USP uses a more conventional Browning-style cam-locked action, similar to that used in the Hi-Power, but with a polymer frame. The USP is a semi-automatic pistol with a mechanically locked breech using the short recoil method of operation. This rather conventional lock-up system has a large rectangular lug over the barrel's chamber that rides into and engages the ejection port cut-out in the slide. When a cartridge is fired, pressures generated by the ignited powder drive the cartridge casing back against the breech face on the slide, driving back both the barrel and slide as they remain locked together in the manner described above. After 3 mm (0.12 in) of unrestricted rearward travel, the projectile leaves the barrel and the gas pressures drop to a safe level. A shaped lug on the underside of the barrel chamber comes into contact with a hooked locking block at the end of the steel recoil spring guide rod, lowering the rear end of the barrel and stopping the barrel's rearward movement. The recoil spring assembly is held in place by the slide stop lever's axis pin and a round cut-out at the front of the slide. For enhanced reliability in high-dust environments, the locking surface on the front top of the barrel's locking lug is tapered with a forward slope. This tapered surface produces a camming action which assists in positive lock-up in the presence of heavy fouling and debris. One of the distinguishing features of the USP is the mechanical recoil reduction system. It consists of a short additional spring located within the main recoil spring on the breech end of the recoil spring assembly. Designed primarily to reduce wear on the pistol's components, the system also lowers the peak recoil forces felt by the shooter. The design with two springs allows the system to work with different kinds of ammunition without requiring any adjustments. Unlike similar systems employed in other guns, the USP design does not incorporate a hydraulic damper and requires no maintenance. Using a similar recoil reduction system, the H&K Mk 23 pistol fired more than 30,000 high pressure (+P) cartridges and 6,000 proof loads without damage or excessive wear to any major components. Abuse and function-testing of USPs have seen more than 20,000 rounds of .40 S&W fired without a component failure. MILSPEC environmental tests were conducted in high and low temperatures, in mud, immersed in water and in salt spray. In one particular test, a bullet was deliberately lodged in the barrel and another bullet was fired to clear the obstruction. The barrel was successfully cleared with only minor structural deformation and continued to produce consistent groups when test fired for accuracy. The recoil reduction system is not present on the USP Compact models, which instead use a simple polymer bushing as a buffer to reduce slide on frame impact. Major metal components on both the USP and Special Operations Pistol are corrosion-resistant. Outside metal surfaces such as the steel slide are protected by a proprietary "Hostile Environment" nitride finish. Internal metal parts, such as springs, are coated with a Dow Corning anti-corrosion chemical to reduce friction and wear. The USP is composed of a total of 54 parts and is broken down into 7 major components for maintenance and cleaning: the barrel, slide, recoil spring, recoil spring guide rod, frame, slide stop and magazine. This is done by retracting the slide back to align the slide stop axis pin with the disassembly notch on the left side of the slide and withdrawing the axis pin. The first USP Compact models appeared in 1994. These are scaled-down USPs, and are available in all the same cartridges as the full size version, and additionally the .357 SIG. Due to the smaller size of the frame, magazines for the Compact variant may have a handgrip extension to better accommodate the shooter's hand. Standard flat floorplates are also available for the USP Compact magazines. The USP Compact comes standard with a bobbed hammer equipped with a flat rubber external thumb grip. This reduces possible snag from the hammer on a holster or clothing while the pistol is being drawn, but still allows the USP Compact to be cocked from a decocked position even in the absence of a spurred hammer. This can be done since decocking the weapon does not fully drop the hammer, leaving it in a somewhat "half-cocked" state. However, the USP Compact cannot be cocked from a dry-fired position as the hammer will be flush to the back of the slide, although the operator could pull the trigger approximately halfway back in a dry-fired position to put the hammer in a half-cocked state, allowing the hammer to be fully cocked with the thumb. A spurred hammer, similar to the one that comes standard on the P10 can be installed onto the USP Compact. USP Compact models lack the mechanical recoil reduction system of the larger full sized USP pistols. Instead, a more compact recoil buffering system is composed of a polymer bushing, around the captive recoil spring, which is designed to absorb energy at the end of the slide's travel rearward. This polymer bushing, with an estimated lifespan of around 20,000 rounds, is used instead of the double spring/captive recoil spring/guide rod found in the full sized USP. In addition to the variants previously described for the full size USP, an ambidextrous safety is available from the manufacturer as a separate part. After installation, the USP Compact effectively becomes a right or left-handed firearm with respect to the decocker and manual safety functions. Heckler & Koch does not authorize caliber conversions, but a separate barrel for a .357 SIG or .40 S&W can be purchased from HK or from aftermarket companies.<ref name="wiki">[[wikipedia:Heckler & Koch USP#USP Compact|Wikipedia entry on Heckler & Koch USP]]</ref> | design =
|min_dmg=9
|max_dmg=24
|min_eva=11
|max_eva= 86
|min_acc=8
|max_acc=60
|min_rof=44
|max_rof=64
|min_hp=33
|max_hp=66
|min_armor=
|max_armor=
|clipsize=10|mov=1015
|craft=0:28:00
|noheavycraft=1
|drop= Can be obtained from many battle stages from Chapter 7-1 onward.
|aura1=Affects all guns|aura2=Increases rate of fire by {{HG aura|28}}
|aura3=
|tile7=1
|tile1=1
|tile6=1
|tile5=0
| characterid gallery=<gallery>File:USP Compact_S.png| GAIN_CN =Profile imageFile:USP Compact.png| GAIN_JP =Full artworkFile:USP Compact_D.png| GAIN_EN =Full damaged artwork| DIALOGUE1_CN =| DIALOGUE1_JP =| DIALOGUE1_EN =| DIALOGUE2_CN =| DIALOGUE2_JP =| DIALOGUE2_EN =| DIALOGUE3_CN =| DIALOGUE3_JP =| DIALOGUE3_EN =| SOULCONTRACT_CN =| SOULCONTRACT_JP =| SOULCONTRACT_EN =| DIALOGUEWEDDING_CN = | DIALOGUEWEDDING_JP = | DIALOGUEWEDDING_EN = | ALLHALLOWS_CN =| ALLHALLOWS_JP =| ALLHALLOWS_EN =| CHRISTMAS_CN =| CHRISTMAS_EN =| CHRISTMAS_JP = </gallery>
| trivia =
